When you need to get a new heating system for your home in Brea, should you go with a heat pump or a furnace? Each type of heating system offers certain pros and cons that you should take into consideration before you make your final decision on a furnace or a heat pump.
Heat pumps can offer better energy efficiency compared to furnaces when they’re used in warmer climates. These heating systems use heat from outdoor air to warm up homes rather than using gas or other fossil fuels. Heat pumps in colder climates can be less efficient in winter than furnaces since they use electric strips as a backup if it’s too cold out to heat the air.
Furnaces offer a reliable source of heat as long as they’re well-maintained. Otherwise, you can end up with problems that prevent them from properly heating your home. Heat pumps can’t rely on outdoor air to heat homes when the temperature outside drops low enough. This is usually more of a problem in northern areas. Heat pumps in Brea can typically provide dependable heat during winter.
Furnaces can last for 20 years or more, especially when they’re kept in good condition with regular maintenance. Heat pumps tend to wear out in a shorter amount of time, such as within 15 years. Since they heat and cool homes, they run throughout the year, which increases the amount of wear and tears they endure. Regular maintenance can help ensure that heat pumps are able to reach their expected lifespan.
Heat pumps and furnaces both need routine maintenance in order to operate efficiently and safely. Heat pumps sometimes need maintenance more frequently since they run more often throughout the year, but this usually involves simple tasks, such as cleaning the coils.
Heat pumps have a higher cost of installation than furnaces. However, the cost of running a furnace can end up being higher year after year due to fuel costs. Running a heat pump generally costs less than running a furnace, depending on electricity rates, which helps offset the higher cost of installation.
Trusted Heating Repair in Brea, CA
If you need help deciding between a heat pump or furnace for your home, contact Econo Air. We offer HVAC installations and other services for homeowners in Brea, CA.
The easiest way to deal with pipes freezing is to prevent them from freezing but if it does happen, you need to move quickly to help minimize any damage that is occurring. Frozen pipes don’t necessarily always burst, but when they do it is because the water is expanding as it’s freezing and adding pressure on the pipe. One way to prevent freezing pipes includes insulating pipes from the cold elements with foam, or by placing an insulating dome over the pipe. You can also allow for a slow drip from the faucet.
Identify the Frozen Pipe
In order to identify a frozen pipe, you will see a bugling in the pipe or a water line covered in frost, but not every frozen pipe is visible. If you notice that there isn’t water flowing through the faucet or the toilet isn’t refilling, that’s a sign there may be an issue.
Thawing Frozen Pipes
Be sure to turn off the water supply before doing anything. The frozen water can be acting as a plug, which prevents the water from spilling out any cracks. Be ready with a bucket, mop, and towels in case there is a leak due to a crack. Use a heat lamp, hair dyer, or space heater to thaw the length of the pipe. You can also wrap pipes in thermostatically controlled heat tape. Don’t use a propane torch, as this could be a fire hazard.
If Pipes Burst
If a pipe bursts, you should shut off the main water supply in order to prevent more flooding. Next call the plumber. While you are waiting for the plumber, try to dry out the area by removing as much water as you can using sponges, mops, and towels. In order to prevent any mildew or mold, use a dehumidifier in the area until it’s dry. If the damage is extensive, also call your insurance agent.
Brea, CA Heating Experts
Contact Econo Air, located in Brea, CA and serving areas of Orange County, for any plumbing related needs, including pipe issues. We are a family-owned and operated, we have been providing air conditioning, heating, electrical and plumbing solutions for your home for more than three decades. Your comfort is our priority. Contact us today!
Buying a replacement furnace for your home can be a major financial commitment, and the range of options on offer may seem overwhelming. It’s always advisable to seek professional advice, but there are a number of key questions you should be aware of.
How Much Heat Do You Need?
The first step in choosing a furnace is to determine how much heat you need, which is generally expressed in British Thermal Units (BTUs). The heat requirement for your home will be calculated as BTUs per square foot and will vary according to a number of factors. These will include the climate zone in which you live, but also more technical matters set out by the Indoor Environment & Energy Efficiency Association, such as the extent and efficiency of your home’s insulation or the number of windows and doors in the home.
What Size and Power of Furnace?
Once the desired figure for BTUs per square foot has been established, the next step is to decide upon the size of furnace required to produce this amount of heat throughout your home. It’s important not to assume that your existing furnace is the best size for your needs. Technological advances in efficiency mean that smaller modern furnaces may produce at least as much heat as larger older ones. And having a larger furnace than you need isn’t just wasteful of energy, it may also lead to problems with the functioning of the installation resulting in an increased frequency of service call outs, higher maintenance costs and a shorter lifespan for the unit.
Modern furnaces vary in price according to the level of efficiency offered, and depending on your future plans it may be worth incurring a higher initial cost so as to enjoy lower energy costs in years to come.
Expert Furnace Installation in Brea, CA
At Econo Air, we’ve now been helping Brea and Southern California homeowners with all their HVAC and plumbing needs for more than 35 years, and our NATE qualified technicians are ready and waiting to work with you on a heating system that‘s exactly right for your needs.
HVAC systems are very important to enhance the comfort of a home during the hot or cold seasons. Over time, heating systems get worn out and may need replacement. However, replacing the heating system should be done wisely and in consideration of the environment. There are many parts of a heating system that can harm the environment if disposed of wrongly.
Most HVAC contractors usually remove the worn out equipment when installing a new heater. A reliable HVAC contractor will typically recycle the parts of the old heating system, instead of throwing them out in the bin. These heaters usually have aluminum, brass, copper and steel parts. Most of these parts can be recycled, but the materials should be separated properly, which requires special tools and welding capability.
Which Parts Can Be Recycled?
In spite of the different metals, many heating systems can be recycled. Metal scrap yards usually need people to have a valid air conditioning license to be able to sell their old AC equipment as scrap metal. From your heating system, the following components can be recycled:
The following parts are not recyclable:
Small plastic components
What About the Refrigerant?
Any refrigerant in your old system needs to be reclaimed, because if it evaporates it may harm the ozone layer. The Environmental Protection Agency requires licensed HVAC technicians to reclaim the refrigerant properly and safely.
Let Us Help You
If you are in need of a family-operated HVAC business that makes home comfort a priority and is keen on conserving the environment, get in touch with Econo Air in Brea, California. We are a trusted heating, cooling, electrical and plumbing company that has been in operation since 1982. Our mission to provide high-quality home solutions to increase in-home comfort. We recycle old heating equipment and can give you advice on how to improve the efficiency of your heating system to save on energy and lower your utility costs. Call us today if you are in dire need of reliable HVAC services.
It’s never good to have a water heater which stops working, not only for the discomfort of realizing you don’t have hot water while halfway through your daily shower, but also having to call a repair person and face the expense of either repair or replacement of the unit. Unfortunately, such a thing is part of owning a house, things do go wrong and mechanical items do break down on occasion. You are going to have to call a service professional, as water heater repair and replacement is not a job for the do-it-yourselfer. If you really are talented with a great mechanical aptitude, consider the consequences of a mistake. At best, a mistake can be costly and mean having to hire a professional to make more repairs, at worst it can have can cause a fire or extensive water damage.
What to Do Immediately
There are, however, two things you can do immediately when you realize the heater isn’t working. First is to turn off the power at the circuit breaker box. This provides a level of safety by simply removing any electric current which is being mismanaged by not heating the waster. You may also realize it might make a difference between being able to repair the unit or having to replace it. Secondly, check for water leaks. If there is a slight leak, it’s probably going to be best to hook up a garden hose to the safety release at the bottom of the unit so can perform a controlled drain rather than waiting for the pan to overflow and cause water damage to your house. Other than that, there really isn’t much you can do other than to call a licensed professional and wait for them to arrive.
Trusted Heating Services in Brea, CA
A broken water heater is certainly not something anybody looks forward to, but try to remain positive. After the repair, you’ll probably notice a lower power bill, as it has probably not been working at peak efficiency for some time. Preemptive inspections and maintenance are always a good idea, so give us a call at Econo Air to take care of your annual needs. Should you have an emergency, know that our technician will be there promptly and conduct an efficient repair as quickly as possible!
Top Ten Reasons You Should Consider Using the HERO Program to Upgrade to a New, Energy-Efficient Heating and Cooling System.
Through the HERO Program, you can finance 100% of a new, energy-efficient Lennox heating & cooling system, including all equipment and installation costs.
Approval is fast – in five minutes or less!
Payments are easy through your property tax and the interest is tax deductible.
Older, less efficient heating and cooling systems can account for as much as 56% of your electric bill. If your current system is over 12 years old, the money you save by switching to a new, energy-efficient Lennox system could pay for the unit itself!
By adding the solar modules included with a SunSource® Home Energy System, you can offset even more of your electricity costs and because the solar modules use renewable energy, it’s also covered by the HERO program.
With the HERO program, you have the final say! Your registered contractor is only paid after you sign off that the project is completed to your satisfaction.
Have the peace of mind in knowing that with the HERO program, all products installed are required to meet local, state or federal efficiency performance standards.
Every contractor registered with HERO has agreed to follow the strictest guidelines, which includes industry-leading consumer safeguards.
You can qualify to receive up to $3,359 in rebates and incentives for energy-efficient and renewable-energy upgrades.
Because with your new Econo Air HVAC system, you’ll find that a cozy home is a happy home.